0
<-- nev left start -->

Circular Straight Sleev

Circular Straight Sleev
Circular Straight Sleev
Product Description

In order to isolate vibrations caused by air handing units, fans or other  equipment connected to air ducts, it is highly recommended to install a flexible  connector joint between the outlet of these devices and the airduct. It is  necessary to select an airtight and flexible cloth, with good weathering  qualities and one which will withstand the temperatures inside and outside the  duct. Duct being generally made of steel, the main difficulty is to fasten the  cloth to it in order to obtain a perfectly airtight joint.

Easyflex circular straight sleeve connectors are perfect for this job.  

The circular straight sleeves can be produced for any diameter, They  are made from Polyurethane cloth strips (M0 and 400ºC/2h  classified) 160 mm wide and the ends are sewn with a strong, high temprature thread. Each sleeve is supplied with two suitable clamps.  Assembly takes place by sliding the sleeve over the external diameter  of the circular duct and its matching part and clamping each end. This  is simple and efficient and affords perfect airtightness 

Fabric

 

  • Glassfiber coated with polyurethane on both sides
  • Fire resistance : M0 and 400ºC/2h
  • Sewn with high temperature thread
  • Other fabrics available on request 

 

Fastening bands
  • Galvanised steel strip
  • Thickness : 0,4 mm
  • Width : 8 mm
  • Length of the steel bands : (perimeter of the sleeve x2) + 5cm
  • Security clamp with “ Cotter Pin Fastening “
Packaging

 

  • Packaging Individual bags with one circular straight sewn fabric sleeve finished to required size and two fastening clamps with fasteners Sold in cartons of 10 individual bags (5 bags for diameters over 900 mm)  Individual bags with one circular straight sewn fabric sleeve finished to required size and two  fastening clamps with fasteners
  • Sold in cartons of 10 individual bags (5 bags for  diameters over 900 mm)

 

Nominal diameter

Width

Code

Description

125 mm

160 mm

121125

MAN160 - Ø 125

160 mm

160 mm

121160

MAN160 - Ø 160

200 mm

160 mm

121200

MAN160 - Ø 200

250 mm

160 mm

121250

MAN160 - Ø 250

280 mm

160 mm

121280

MAN160 - Ø 280

315 mm

160 mm

121315

MAN160 - Ø 315

355 mm

160 mm

121355

MAN160 - Ø 355

400 mm

160 mm

121400

MAN160 - Ø 400

450 mm

160 mm

121450

MAN160 - Ø 450

500 mm

160 mm

121500

MAN160 - Ø 500

560 mm

160 mm

121560

MAN160 - Ø 560

630 mm

160 mm

121630

MAN160 - Ø 630

710 mm

160 mm

121710

MAN160 - Ø 710

800 mm

160 mm

121800

MAN160 - Ø 800

900 mm

160 mm

121900

MAN160 - Ø 900

1000 mm

160 mm

122000

MAN160 - Ø 1000

1120 mm

160 mm

122120

MAN160 - Ø 1120

1250 mm

160 mm

122250

MAN160 - Ø 1250

Contact Us

B No. B-167/168, Phase II, Gautam Budh Nagar Noida Uttar Pradesh India 91-120-4552743
Phone :09811408957